It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
Large Carcass Lampshade Empire style of 50 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Set of frames diam. 40cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 30 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27
Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 20 cm, Diam. E27 socket, 38mm
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Pyramid Lampshade frame 40x15x30 cm, Armature square 4 branches anticorrosive epoxy, for E27
Pyramid Lampshade frame 50x18,5x39, Armature square 4 branches anticorrosive epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Carcass Shade Rectangle High 30 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27
White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Frame, square wall lamp 30x30 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 25 cm, Diam. E27 socket, 38mm
Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
