Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27
zoom_in
  • Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27
  • Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27

Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27

€23.50

Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27

5 Items
Quantity
check In stock

Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27

It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.

When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.

If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.

A40E
5 Items

Notify me when available

Data sheet

Frame shape
American

Specific References

You might also like

Set of frames diam. 25cm for lampshade, round rings epoxy white, for lamp holder 40mm E27

€9.10
search

White polyphane Roll 15 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€267.95
search

White Metal Circle of 12 cm for Shades, White Epoxy Wire ring for Dream Catcher

To create lampshades, dream catchers or for any other use.

Wire diameter: 2.6mm

€1.30
search

White Metal Circle of 10 cm for Shades, White Epoxy Wire ring for Dream Catcher

To create lampshades, dream catchers or for any other use

Wire diameter: 2.6mm

€1.30
search

Large White Metal Circle of 60 cm for Shades, White Epoxy Wire ring for Dream Catcher

€9.60
search

White electrical cable with E14 socket and switch, length 2 m, for the realization of a...

White electrical cable with E14 socket and switch, length 2 m, for the realization of a bedside lamp

€11.00
search

White electrical cable with E27 socket and switch, length 2 m, for the realization of a...

White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp

€11.00
search

Cable black with E14 socket and switch, length 2 m, for the realization of a lamp

Cable  black with E14 socket and switch, length 2 m, for the realization of a lamp

€11.00
search

Cable black with E27 socket and switch, length 2 m, for the realization of a lamp

Cable  black with E27 socket and switch, length 2 m, for the realization of a lamp

€11.00
search

Large Round Frame, white, High. 25 cm and Diam. 50 cm, E27 socket 38mm, for lampshade

Large Round Frame, white, High. 25 cm and Diam. 50 cm, E27 socket 38mm, for lampshade

€37.00
search

Cable with foot switch, black, length 3.50 m, 250V power cord

Cable with foot switch, black, length 3.50 m, 250V power cord

€16.00
search

Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade

Large Round Frame, white, High. 25 cm and Diam. 60 cm, E27 socket 38mm, for lampshade

€47.00
search

White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket,...

White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm, cable included

€47.50
search

Large Round Frame, white, High. 30 cm and Diam. 80 cm, E27 socket 38mm, for lampshade

€66.67
search

White Round Frame for Lampshade, Height 80 cm and Diam. 30 for E27 Socket, 38mm

White Round Frame for Lampshade, Height 80 cm and Diam. 30 for E27 Socket, 38mm

€33.75
search

16 other products in the category

Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion...

Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27

€35.00
search

Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for...

Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration

€16.00
search

White polyphane sheet 2 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€37.00
search

Large Drum Lampshade Carcass, 6-branched frame in anti-corrosion epoxy, for E27

Large Drum Lampshade Carcass, 6-branched frame in anti-corrosion epoxy, for E27

€82.00
search

Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy...

Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14

€13.50
search

Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin,...

Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin, for E27 for decoration

€13.00
search

White electrical cable with E27 socket and switch, length 2 m, for the realization of a...

White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp

€11.00
search

White polyphane Roll 15 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€267.95
search

Carcass Shade Rectangle 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy,...

Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27

€23.00
search

Frame, square wall lamp 25x25 cm, made of anti-corrosion epoxy resin, for E27 for...

Frame, square wall lamp 25x25 cm, made of anti-corrosion epoxy resin, for E27 for decoration

€18.00
search

Large White Round Lampshade Frame, Height and Diam. 50 cm, diameter 38 mm Socket, to E27

Large White Round Lampshade Frame, Height and Diam. 50 cm, diameter 38 mm Socket, to E27

€39.00
search

Suspension frame, 30 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27

Suspension frame, 30 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27

€17.45
search

Frame half-cone wall lamp 10x29.5x18.5 cm, made of corrosion protection epoxy resin,...

Frame half-cone wall lamp 10x29.5x18.5 cm, made of corrosion protection epoxy resin, for E27 for decoration

€19.00
search