White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Lampshade base frame round, white, Height and Diam. 25 cm, Diam. E27 socket, 38mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm
Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White Round Frame for Lampshade, Height 60 cm and Diam. 30 for E27 Socket, 38mm
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm, cable included
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
White square frame for lampshade, height and width 25 cm, for 38mm socket
Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Frame, square wall lamp 25x25 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White Round Frame for Lampshade, Height 80 cm and Diam. 30 for E27 Socket, 38mm
Pyramid Lampshade frame short 20x6x14 cm, Armature square bottom 4 branches anticorrosive epoxy, for E14
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
This lampshade carcass is spherical in shape with 10 branches.
Bottom diameter 45 cm
Top diameter 11 cm
For an E27 socket
Little Carcass lampshade "American" 15 cm, Cone-shaped frame with 6 branches in anti-corrosion epoxy, for E14
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Suspension frame, 20 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E14
Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27
Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
Large Round Frame, white, High. 25 cm and Diam. 70 cm, E27 socket 38mm, for lampshade
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
