Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Suspension frame, 40 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
Suspension frame, 40 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 30 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 20 cm, Dome armature 8 branches anticorrosion epoxy, for E14
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with socket cover
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Carcass Lampshade Bell with Collar 45 cm, Dome Frame of 10 branches, in anti-corrosion epoxy, for E27
Frame set from Ø 20 to 30cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 30cm, white epoxy, for E27 socket
Suspension frame, 40 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Cable with foot switch, black, length 3.50 m, 250V power cord
Frame half-round wall lamp 30x30 cm, made of corrosion protection epoxy resin, for E27 for decoration
Carcass Lampshade Bell with Collar 30 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Suspension frame, 30 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Frame, Rectangle wall lamp 25x15 cm, made of anti-corrosion epoxy resin, for E27 for decoration
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Big Carcass Lampshade Drum shape of 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Suspension frame, 20 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E14
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Little Carcass lampshade "American" 15 cm, Cone-shaped frame with 6 branches in anti-corrosion epoxy, for E14