Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Large Carcass Lampshade Empire style of 50 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Lampshade base frame with Cut sides 24x11.5/30x17x23 cm, Oval rectangular frame, for E27
Large Round Frame, white, High. 25 cm and Diam. 70 cm, E27 socket 38mm, for lampshade
Lampshade Bell 20 cm, Dome armature 8 branches anticorrosion epoxy, for E14
Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 15 cm, Diam. E14 socket, 28mm
Frame, Rectangle wall lamp 30x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Little Carcass Lampshade Drum shape of 20 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E14
Shade Carcass Conical 50 x 25 cm, 8-branch frame, anticorrosion epoxy, E27
Carcass lampshade "American" 20 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E14
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
