zoom_in

White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm

€13.90
Tax included

White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm

4 Items
Quantity
check In stock

Wishlist Add to wishlist

White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm

It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.

When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.

If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.

2213010-E14
4 Items

Notify me when available

Data sheet

Frame shape
Round

Specific References

You might also like

White Round Lampshade base frame, Height and Diam. 20 cm, Diam. E14 socket, 28mm

€17.60
search

Lampshade base frame round, white, Height and Diam. 25 cm, Diam. E27 socket, 38mm

Lampshade base frame round, white, Height and Diam. 25 cm, Diam. E27 socket, 38mm

€18.95
search

White square frame for lampshade, height and width 10 cm, for 28mm socket

€19.50
search

White electrical cable with E14 socket and switch, length 2 m, for the realization of a...

White electrical cable with E14 socket and switch, length 2 m, for the realization of a bedside lamp

€11.00
search

White square frame for lampshade, height and width 30 cm, for 38mm socket

€28.00
search

Carcass Lampshade Empire style of 20 cm, Armature shape cone with 8 branches epoxy...

€16.95
search

White square frame for lampshade, height and width 25 cm, for 38mm socket

White square frame for lampshade, height and width 25 cm, for 38mm socket

€26.00
search

Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy...

Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14

€14.85
search

Square Frame Set with feet, 15 cm for lampshade, Square epoxy white, for lamp holder...

Square Frame Set with feet, 15 cm for lampshade, Square epoxy white, for lamp holder 40mm E27

€9.00
search

Pyramid Lampshade frame 40x15x30 cm, Armature square 4 branches anticorrosive epoxy,...

Pyramid Lampshade frame 40x15x30 cm, Armature square 4 branches anticorrosive epoxy, for E27

€25.75
search

Large White Round Lampshade Frame, Height and Diam. 55 cm, diameter 38 mm Socket

Large White Round Lampshade Frame, Height and Diam. 55 cm, diameter 38 mm Socket

€60.00
search

Little Carcass lampshade "American" 15 cm, Cone-shaped frame with 6 branches in...

Little Carcass lampshade "American" 15 cm, Cone-shaped frame with 6 branches in anti-corrosion epoxy, for E14

€13.50
search

Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy...

Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14

€14.90
search

White polyphane sheet 2 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€38.50
search

Lamp holder reduction from E27 to E14, in metal covered with white epoxy, with 3 lugs

This E27 socket lampshade reduction ring allows you to adapt a lampshade designed to be fixed on an E27 socket to an E14 socket with fixing ring.

€3.00
search

Cable black with E14 socket and switch, length 2 m, for the realization of a lamp

Cable  black with E14 socket and switch, length 2 m, for the realization of a lamp

€11.00
search

White polyphane sheet 3 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€57.00
search

White polyphane sheet 1 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€20.00
search

16 other products in the category

Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for...

Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration

€16.00
search

Suspension frame, 45 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27

This lampshade carcass is spherical in shape with 10 branches.

Bottom diameter 45 cm
Top diameter 11 cm

For an E27 socket

€31.00
search

Carcass Shade Rectangle 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy,...

Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27

€23.00
search

White polyphane sheet 1 m x 0.25 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€8.00
search

White polyphane sheet 2 m x 0.50 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€32.00
search

Carcass Lampshade Empire style of 30 cm, Armature shape cone with 8 branches epoxy...

€19.00
search

Carcass lampshade "American" 30 cm, Cone-shaped frame with 8 branches in anti-corrosion...

Carcass lampshade "American" 30 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27

€19.70
search

Suspension frame, 20 cm bell, lampshade 8 branches, in anticorrosion epoxy, for E14

Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27

€22.10
search

Small white polyphane sheet, 2 m x 15 cm, self-adhesive on one side, 0.30 mm thick, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€9.00
search

Large White Round Lampshade Frame, Height and Diam. 40 cm, diameter 38 mm Socket E27

Create your own lampshades with this metal frame that will serve as the structure for your hanging lights. Cylindrical in shape, this lampshade frame is suitable for any kind of light creation, from kitchen to bedroom fixtures.

To give your lamp more structure and diffuse the light, we recommend using polyphane paper, which has one sticky side. This way, you can easily attach the paper or fabric of your choice, depending on the atmosphere you want to create in your room.

€27.00
search

Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy...

Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27

€45.00
search

Frame half-cone wall lamp 24x7.5x16 cm, made of corrosion protection epoxy resin, for...

Frame half-cone wall lamp 24x7.5x16 cm, made of corrosion protection epoxy resin, for E27 for decoration

€18.00
search

White polyphane sheet 3 m x 0.60 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€57.00
search