Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Suspension frame, 45 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
€31.00
Tax included
This lampshade carcass is spherical in shape with 10 branches.
Bottom diameter 45 cm
Top diameter 11 cm
For an E27 socket
4 Items
Suspension frame, 45 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
CL45-DBH
4 Items
Data sheet
- Frame shape
- Bell
- Frame shape
- Suspension, ceiling light
Specific References
You might also like
Lampshade Bell 30 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 30 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Lampshade Bell 20 cm, Dome armature 8 branches anticorrosion epoxy, for E14
Lampshade Bell 20 cm, Dome armature 8 branches anticorrosion epoxy, for E14
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with...
White electrical cable with E27 socket, for lamp suspension, 1 m long cable, with socket cover
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion...
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Carcass Lampshade Bell with Collar 45 cm, Dome Frame of 10 branches, in anti-corrosion...
Carcass Lampshade Bell with Collar 45 cm, Dome Frame of 10 branches, in anti-corrosion epoxy, for E27
16 other products in the category
Small white polyphane sheet, 1 m x 15 cm, self-adhesive on one side, 0.30 mm thick, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Drum Lampshade Carcass, heigh 35 cm, 6-branched frame in anti-corrosion epoxy, for E27
Drum Lampshade Carcass, heigh 35 cm, 6-branched frame in anti-corrosion epoxy, for E27
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
Cable with foot switch, black, length 3.50 m, 250V power cord
Cable with foot switch, black, length 3.50 m, 250V power cord
Lampshade round clip clamp, diameter 8 cm and circle 15 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm
Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion...
Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27
Lampshade round clip clamp, diameter 12 cm and circle 20 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches...
Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27
White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm
Shade Carcass Conical 50 x 25 cm, 8-branch frame, anticorrosion epoxy, E27
Shade Carcass Conical 50 x 25 cm, 8-branch frame, anticorrosion epoxy, E27
White polyphane sheet 2 m x 0.20 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy...
Little Carcass Lampshade Drum shape of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14
This lampshade carcass is spherical in shape with 10 branches.
Bottom diameter 45 cm
Top diameter 11 cm
For an E27 socket