It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
White Round Frame for Lampshade, Height 60 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm
Large White Round Lampshade Frame, Height and Diam. 50 cm, diameter 38 mm Socket, to E27
Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White electrical cable with E14 socket and switch, length 2 m, for the realization of a bedside lamp
White Round Frame for Lampshade, Height 80 cm and Diam. 30 for E27 Socket, 38mm
Carcass Lampshade Bell with Collar 45 cm, Dome Frame of 10 branches, in anti-corrosion epoxy, for E27
Frame, square wall lamp 25x25 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
Frame half-cone wall lamp 10x29.5x18.5 cm, made of corrosion protection epoxy resin, for E27 for decoration
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Pyramid Lampshade frame 30x10,5x22,5 cm, Armature square 4 branches anticorrosive epoxy, for E27
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.