White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm

Large Carcass Lampshade Empire style of 50 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27

Pyramid Lampshade frame short 40x11x27 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27

Big Carcass Lampshade Drum shape of 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27

Large Drum Lampshade Carcass, 6-branched frame in anti-corrosion epoxy, for E27

Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Frame, Rectangle wall lamp 25x15 cm, made of anti-corrosion epoxy resin, for E27 for decoration

Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27

White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm, cable included

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

Big Carcass lampshade "American" 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27