White electrical cable with E27 socket and switch, length 2 m, for the realization of a...
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm, cable included
White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm, cable included
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Large Carcass Lampshade Empire style of 50 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Large White Round Lampshade Frame, Height and Diam. 55 cm, diameter 38 mm Socket
Big Carcass lampshade "American" 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Cable black with E27 socket and switch, length 2 m, for the realization of a lamp
White Round Frame for Lampshade, Height 60 cm and Diam. 30 for E27 Socket, 38mm
Large Round Frame, white, High. 25 cm and Diam. 50 cm, E27 socket 38mm, for lampshade
Cable with foot switch, black, length 3.50 m, 250V power cord
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm, cable included
Small frame, Rectangle wall lamp 20x15 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 15 cm, Diam. E14 socket, 28mm
Little Carcass lampshade "American" 15 cm, Cone-shaped frame with 6 branches in anti-corrosion epoxy, for E14
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Carcass Lampshade Bell with Collar 30 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Lampshade Bell 30 cm, Dome armature 10 branches anticorrosion epoxy, for E27
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Big Carcass Lampshade Drum shape of 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Frame, square wall lamp 30x30 cm, made of anti-corrosion epoxy resin, for E27 for decoration