Large Round Frame, white, High. 25 cm and Diam. 70 cm, E27 socket 38mm, for lampshade
Large Round Frame, white, High. 25 cm and Diam. 70 cm, E27 socket 38mm, for lampshade
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Carcass Lampshade Bell with Collar 40 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Cable black with E14 socket and switch, length 2 m, for the realization of a lamp
Frame, Rectangle wall lamp 30x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 15 cm, Diam. E14 socket, 28mm
Large White Round Lampshade Frame, Height and Diam. 50 cm, diameter 38 mm Socket, to E27
Frame, square wall lamp 25x25 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Big Carcass lampshade "American" 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27
Pyramid Lampshade frame short 20x6x14 cm, Armature square bottom 4 branches anticorrosive epoxy, for E14
Carcass lampshade "American" 40 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27