White square frame for lampshade, height and width 20 cm, for 38mm socket

White square frame for lampshade, height and width 25 cm, for 38mm socket

Cable  black with E27 socket and switch, length 2 m, for the realization of a lamp

Carcass Shade Rectangle High 30 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27

Shade Carcass Conical 60 x 30 cm, 8-branch frame, anticorrosion epoxy, E27

Carcass Lampshade Drum shape of 30 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27

Big Carcass Lampshade Drum shape of 60 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm

White Round Frame for Lampshade, Height 80 cm and Diam. 30 for E27 Socket, 38mm

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Frame half-round wall lamp 30x30 cm, made of corrosion protection epoxy resin, for E27 for decoration

Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 25 cm, Diam. E27 socket, 38mm

White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm

Pyramid Lampshade frame 30x10,5x22,5 cm, Armature square 4 branches anticorrosive epoxy, for E27