Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Lampshade base frame with Cut sides 32x15.5 / 40x22x30 cm, Oval rectangular frame, for E27
Small frame, Rectangle wall lamp 20x15 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Drum Lampshade Carcass, heigh 35 cm, 6-branched frame in anti-corrosion epoxy, for E27
Shade Carcass Conical 60 x 30 cm, 8-branch frame, anticorrosion epoxy, E27
White Round Frame for Lampshade, Height 40 cm and Diameter 30 cm for E27 Socket, 38mm
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Shade Carcass Conical 50 x 25 cm, 8-branch frame, anticorrosion epoxy, E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Carcass Lampshade Bell with Collar 30 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27
Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration
White Round Frame for Lampshade, Height 70 cm and Diam. 30 for E27 Socket, 38mm
White Round Frame for Lampshade with feet, Height 62 cm and Diam. 30 for E27 Socket, 38mm
Shade Carcass Conical 40 x 21 cm, 6-branch frame, anticorrosion epoxy, E27
Carcass Lampshade Drum shape of 40 cm, Armature shape cone with 8 branches epoxy anticorrosive material, for E27
