Suspension frame, 30 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27

Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters

Frame, Rectangle wall lamp 30x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration

Large Round Frame, white, High. 35 cm and Diam. 45 cm, E27 socket 38mm, for lampshade

Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

White Round Frame for Lampshade, Height 80 cm and Diam. 30 for E27 Socket, 38mm

Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb

Carcass Lampshade Bell with Collar 30 cm, Dome Frame of 12 branches, in anti-corrosion epoxy, for E27

Lampshade base frame round, white, Height and Diam. 25 cm, Diam. E27 socket, 38mm

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

Pyramid Lampshade frame 30x10,5x22,5 cm, Armature square 4 branches anticorrosive epoxy, for E27

Carcass Lampshade Empire style of 15 cm, Armature shape cone with 6 branches epoxy anticorrosive material, for E14

White electrical cable with E14 socket and switch, length 2 m, for the realization of a bedside lamp

Pyramid Lampshade frame short 20x6x14 cm, Armature square bottom 4 branches anticorrosive epoxy, for E14

Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!