Large White Round Lampshade Frame, Height and Diam. 45 cm, diameter 38 mm Socket …

Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb

White Round Frame for Lampshade with feet, Height 82 cm and Diam. 30 for E27 Socket, 38mm, cable included

This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!

Small frame, Rectangle wall lamp 20x15 cm, made of anti-corrosion epoxy resin, for E27 for decoration

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 25 cm, Diam. E27 socket, 38mm

Cable  black with E14 socket and switch, length 2 m, for the realization of a lamp

Carcass Shade Rectangle High 30 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27

Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Suspension frame, 20 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E14

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Big Carcass lampshade "American" 50 cm, Armature shape cone with 10 branches epoxy anticorrosive material, for E27

This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.

It has a white epoxy finish which gives it resistance over time.

Small frame half-round wall lamp 20x20 cm for E14, made of corrosion protection epoxy resin, for decoration

Pyramid Lampshade frame 30x10,5x22,5 cm, Armature square 4 branches anticorrosive epoxy, for E27