Pyramid Lampshade frame 50x18,5x39, Armature square 4 branches anticorrosive epoxy, for E27
Pyramid Lampshade frame 50x18,5x39, Armature square 4 branches anticorrosive epoxy, for E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Pyramid Lampshade frame short 20x6x14 cm, Armature square bottom 4 branches anticorrosive epoxy, for E14
Carcass Lampshade Bell with Collar 45 cm, Dome Frame of 10 branches, in anti-corrosion epoxy, for E27
Carcass Shade Rectangle High 40 cm, Rectangular frame 4 branches in anti-corrosion epoxy, for E27
Suspension frame, 40 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Suspension frame, 20 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E14
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White Round Frame for Lampshade, Height 25 cm and Diam. 15 for E27 Socket, 38mm
Lampshade base frame with Cut sides 24x11.5/30x17x23 cm, Oval rectangular frame, for E27
Kit 1 polyphane sheet and white Round Frame for Lampshade, Cylinder Height and Diam. 15 cm, Diam. E14 socket, 28mm
Suspension frame, 50 cm conical, ceiling light 8 branches, in anticorrosion epoxy, for E27
Lampshade base frame with Cut sides 40x11/50x14xh.37,5 cm, Oval rectangular frame, for E27
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Shade Carcass Conical 60 x 30 cm, 8-branch frame, anticorrosion epoxy, E27
White Round Frame for Lampshade with feet, Height 72 cm and Diam. 30 for E27 Socket, 38mm
Large Round Frame, white, High. 25 cm and Diam. 40 cm, E27 socket 38mm, for lampshade
Little Carcass lampshade "American" 15 cm, Cone-shaped frame with 6 branches in anti-corrosion epoxy, for E14
White electrical cable with E14 socket and switch, length 2 m, for the realization of a bedside lamp
Pyramid Lampshade frame 50x18,5x39, Armature square 4 branches anticorrosive epoxy, for E27
