Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin, for E27 for decoration
Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin, for E27 for decoration
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Carcass Lampshade Empire style of 60 cm, Armature shape cone with 10 branches anticorrosive, for E27
White Round Frame for Lampshade with feet, Height 72 cm and Diam. 30 for E27 Socket, 38mm
Suspension frame, 40 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
White Round Frame for Lampshade, Height 40 cm and Diam. 20 for E27 Socket, 38mm
White Round Lampshade base frame, Height and Diam. 20 cm, Diam. E27 socket, 38mm
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
White Round Lampshade base frame, Height and Diam. 10 cm, Diam. E14 socket, 28mm
Lampshade Bell 40 cm, Dome armature 10 branches anticorrosion epoxy, for E27
Cable with foot switch, black, length 3.50 m, 250V power cord
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
Suspension frame, 30 cm bell, lampshade 10 branches, in anticorrosion epoxy, for E27
Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin, for E27 for decoration
