Frame half-round wall lamp 30x30 cm, made of corrosion protection epoxy resin, for E27 for decoration
Frame half-round wall lamp 30x30 cm, made of corrosion protection epoxy resin, for E27 for decoration
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Mulberry paper is a paper that reveals the fiber. It is ideal for framing, making lampshades or sharing them. Mulberry paper has a particularly silky texture and its visible fibers give it a lot of charm. Both flexible and resistant, it is ideal for decoupage, creative hobbies, decoration and packaging.
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
White electrical cable with E27 socket and switch, length 2 m, for the realization of a bedside lamp
Ivory lace ribbon, 1.5 cm x 10 m, for a chic and bohemian table decor
Small frame, square wall lamp 20x20 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Frame, square wall lamp 30x30 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Small frame half-round wall lamp 20x20 cm, made of corrosion protection epoxy resin, for E27 for decoration
Small frame half-round wall lamp 20x20 cm for E14, made of corrosion protection epoxy resin, for decoration
Frame half-round wall lamp 25x25 cm, made of corrosion protection epoxy resin, for E27 for decoration
Frame, square wall lamp 25x25 cm, made of anti-corrosion epoxy resin, for E27 for decoration
Pyramid Lampshade frame 50x18,5x39, Armature square 4 branches anticorrosive epoxy, for E27
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
White Round Frame for Lampshade, Height 25 cm and Diam. 15 for E27 Socket, 38mm
White Round Lampshade base frame, Height and Diam. 15 cm, Diam. E14 socket, 28mm
Large Round Frame, white, High. 25 cm and Diam. 50 cm, E27 socket 38mm, for lampshade
Little Frame half-cone wall lamp 20x7x14,5 cm, made of corrosion protection epoxy resin, for E14 for decoration
Little Carcass lampshade "American" 15 cm, Cone-shaped frame with 6 branches in anti-corrosion epoxy, for E14
Carcass lampshade "American" 30 cm, Cone-shaped frame with 8 branches in anti-corrosion epoxy, for E27
White Round Frame for Lampshade, Height 30 cm and Diam. 20 for E27 Socket, 38mm
Shade Carcass Conical 50 x 25 cm, 8-branch frame, anticorrosion epoxy, E27
Suspension frame, 30 cm conical, ceiling light 6 branches, in anticorrosion epoxy, for E27
White Round Frame for Lampshade, Height 50 cm and Diam. 30 for E27 Socket, 38mm
Pyramid Lampshade frame short 30x8x20 cm, Armature square bottom 4 branches anticorrosive epoxy, for E27
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Frame half-round wall lamp 30x30 cm, made of corrosion protection epoxy resin, for E27 for decoration
