Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Wire diameter: 4.3mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
White Round Frame, for Shade Height and Diam. 30 cm, Diam. E27 socket, 38mm
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
Gold Metal Circle of 10 cm for Shades, Epoxy Wire ring for Dream Catcher
Square Frame Set with feet, 20 cm for lampshade, Square epoxy white, for lamp holder 40mm E27
Large Black Metal Circle of 60 cm for Shades,Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
Boho dream catcher, diam 33 cm, White feathers, Wooden and jute beads, 85 cm long
This circular frame is made in France from fully joined metal wires. It is available in several diameters from 20 to 90 cm, providing a base for a pendant light or customised lampshade.
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 2 large white metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large white metal circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 2 black metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Large XL black Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
Antique gold Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher