Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
€66.00
Tax included
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
4 Items
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
Wire thickness : 3.2 mm to 4,3 mm
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the paint a little with sandpaper for better adhesion.
L-OR-MC30-90
4 Items
Data sheet
- Diameter
- 50 cm
- Diameter
- 90 cm
- Diameter
- 70 cm
- Diameter
- 40 cm
- Diameter
- 80 cm
- Diameter
- 60 cm
- Diameter
- 30 cm
- Color
- Gold
Specific References
You might also like
Double satin ribbon, width 6 mm, roll of 50 meters
Double-sided satin tape, width 6 mm, roll of 50 meters
16 other products in the category
White Metal Circle of 10 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
White Metal Circle of 15 cm for Shades, White Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Frame set from Ø 20 to 40cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 40cm,...
Frame set from Ø 20 to 40cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 40cm, white epoxy, for E27 socket
Red Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Red Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Set of 6 metal circles red, diameter 20 cm to 70 cm, rings for dream catcher, lampshade
Lampshade round clip clamp, diameter 10 cm and circle 15 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Large White Metal Circle of 65 cm for Shades, White Epoxy Wire ring for Dream Catcher
Lampshade round clip clamp, diameter 14 cm and circle 20 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 2 large black metal circles Diameter 90 cm for lampshade, epoxy rings for...
Set of 2 large black metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Black Metal Circle of 10 cm for Shades, Epoxy Wire ring for Dream Catcher
Black Metal Circle of 10 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 2 black metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 black metal circles Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 steel gray metal circles, diam. 30 cm for lampshade, silver epoxy rings Dream...
Set of 2 steel gray metal circles, diam. 30 cm for lampshade, silver epoxy rings Dream catcher
Set of 8 very large metal circles in white epoxy, Ø 30 cm to 100 cm, epoxy rings for...
Wire thickness : 3.2 mm to 4,3 mm
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm,...
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher