Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket

€7.90

Tax included

In stock 3 Items

Quantity

In stock

Wishlist Add to wishlist

Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket

It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.

When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.

If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.

Reference OSSA20-35

In stock 3 Items

Notify me when available

Data sheet

Diameter: 20 cm
Diameter: 35 cm
Color: White

Specific References

Set of 50 wooden clothespins, untreated, 7cm x 1cm

€9.50

Super adhesive tape, double sided, translucent, Tacky, 5 meters, width. 3 mm

Super adhesive tape, double sided, translucent, Tacky, 10 meters, width. 3 mm

This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!

€3.50

Tacky super-adhesive, double-sided, translucent tape, 5 meters, width. 6 mm

Tacky super-adhesive, double-sided, translucent tape, 10 meters, width. 6 mm

€5.40

Tacky translucent double-sided super adhesive tape, width 24mm, 10 meters

Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters

€12.00

White Metal Circle of 30 cm for Shades, White Epoxy Wire ring for Dream Catcher

€3.50

Set of frames diam. 20cm for lampshade, round rings epoxy white, for lamp holder 40mm E27

€8.35

3 rouleaux de Bordures dentelées en velours noir autocollant, Ruban large de longueur 3 mètres

3 rolls of serrated borders, in velvet, turquoise, red and white stickers, 3x1meter long

€6.95

16 other products in the category

White polyphane sheet 2 m x 0.25 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

€15.50