Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Large antique gold Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher
Large antique gold Metal Circle of 50 cm for Shades, Epoxy Wire ring for Dream Catcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Double-sided satin tape, width 6 mm, roll of 50 meters
Lot of 12 White Rose Heads, Rosebud 35 mm to stitchSet of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of 2 large old gold circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Large Black Metal Circle of 50 cm for Shades,Epoxy Wire ring for Dream Catcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Red Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of 10 square wooden sticks, length 30 cm, diameter 0.8 cm, rods, sticks, macramé
Set of 10 rings in wood, diameter 4,8 cm, for macrame, jewellery, pacifier
White metallic square 35 x 35 cm for lampshade, White epoxy Dream catcher
Set of 9 white metal circles Diameter 5 cm to 30 cm for lampshade, epoxy rings for Dreamcatcher
Black Metal Circle of 30 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of black frames diam. 40cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of 6 large old gold metal circles Diameter 30 cm to 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 38mm E27
Set of 2 large old gold circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 red metal circles, diam. 20 cm for lampshade, Epoxy rings Dreamcatcher
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
White metallic square 40 x 40 cm for lampshade, White epoxy Dream catcher
Set of 2 white metal circles Diameter 55 cm for lampshade, epoxy rings for Dreamcatcher