Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
€3.00
DELIVERY TO AUSTRIA, GERMANY, BELGIUM AND SPAIN BY MONDIAL RELAY, FROM €12
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
Hotline: +33 3 88 94 47 29 - Mon to Thu from 8 AM - 5 PM, Fri from 8 AM to 12AM
White metallic square 40 x 40 cm for lampshade, White epoxy Dream catcher
€4.20
White metallic square 40 x 40 cm for lampshade, White epoxy Dream catcher
7 Items
White metallic square 40 x 40 cm for lampshade, White epoxy Dream catcher
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
You might also like
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
Transparent nylon thread for jewelry, diameter 0.7 mm, 100 m, resistance 20 kg
€5.40
Double satin ribbon, width 6 mm, roll of 50 meters
Double-sided satin tape, width 6 mm, roll of 50 meters
€13.00
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
White metal oval 20 x 13 cm for lampshade, Epoxy white for Dreamcatcher
€1.92
White metallic square 10 x 10 cm for lampshade, White epoxy Dream catcher
White metallic square 10 x 10 cm for lampshade, White epoxy Dream catcher
€1.90
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
€2.25
16 other products in the category
Big Set of 3 large white metal circles Diameter 90 cm for lampshade, epoxy rings for...
Big Set of 3 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
€70.00
Set of frames diam. 70cm for lampshade, large round rings epoxy white, for lamp holder...
Set of frames diam. 70cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
€30.00
Set of 2 steel gray metal circles, diam. 30 cm for lampshade, silver epoxy rings Dream...
Set of 2 steel gray metal circles, diam. 30 cm for lampshade, silver epoxy rings Dream catcher
€5.00
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm,...
Frame set from Ø 20 to 35cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 35cm, white epoxy, for E27 socket
€7.90
Square Frame Set with feet, 20 cm for lampshade, Square epoxy white, for lamp holder...
Square Frame Set with feet, 20 cm for lampshade, Square epoxy white, for lamp holder 40mm E27
€12.00
Set of 5 white metal circles Diameter 13 cm for lampshade, epoxy wire ring for...
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
€6.00
Set of black frames diam. 100 cm for lampshade, large round rings epoxy black, for lamp...
Set of black frames diam. 100 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
€85.00
Set of 2 large old gold circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large old gold circles Diameter 50 cm for lampshade, epoxy rings for Dreamcatcher
€13.15
White metallic square 25 x 25 cm for lampshade, White epoxy Dream catcher
White metallic square 25 x 25 cm for lampshade, White epoxy Dream catcher
€3.00
Set of 2 large black metal circles Diameter 60 cm for lampshade, epoxy rings for...
Set of 2 large black metal circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
€17.50
Set of 2 large white metal circles Diameter 60 cm for lampshade, epoxy rings for...
Set of 2 large white metal circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
€17.50
White polyphane sheet 1 m x 0.25 m, adhesive on 1 side, thickness 0.30 mm, 30/100, for...
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
€7.00
Set of 5 steel gray metal circles, diam. 20 cm for lampshade, silver epoxy rings Dream...
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
€7.55
Lampshade round clip clamp, diameter 10 cm and circle 18 cm, in anti-corrosion epoxy
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
€5.56
White metallic square 40 x 40 cm for lampshade, White epoxy Dream catcher