Set of frames diam. 90cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of frames diam. 90cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
This double-sided adhesive tape has been specially designed for assemble polyphane on your lampshade rings. It allows the fabric or paper to be glued to the hoop. But also for all your other scrapbooking projects on metal, glass, wood..!
Tacky translucent double-sided super adhesive tape, width 24mm, 5 meters
Rectangular shade frame 30 x 15 x 15 cm, rectangle for E27 bulb
Big Set of 3 large white metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Large XXL White Metal Circle of 100 cm for Shades, White Epoxy Wire ring for Dream Catcher
Set of 2 large white metal circles Diameter 100 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Big Set of 8 large old gold metal circles Diameter 30 cm to 100 cm for lampshade, epoxy rings for Dreamcatcher
Wire thickness : 3.2 mm to 4,3 mm
Set of 2 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 red metal circles, diam. 30 cm for lampshade, Epoxy rings Dreamcatcher
Set of frames diam. 70cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of frames with legs, diam. 30 cm for lampshade, Round rings epoxy white, for lamp holder 40mm E27
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 5 metal circles red, diameter 20 cm to 60 cm, rings for dream catcher, lampshade
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Big Set of 8 large Black metal circles Diameter 30 cm to 100 cm for lampshade, epoxy rings for Dreamcatcher
Large XL black Metal Circle of 70 cm for Shades, Epoxy Wire ring for Dream Catcher
Square Frame Set with feet, 30 cm for lampshade, Square epoxy white, for lamp holder E27
Big Set of 3 large black metal circles Diameter 80 cm for lampshade, epoxy rings for Dreamcatcher
Set of black frames diam. 90 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Large XXL antique gold Metal Circle of 100 cm for Shades, Epoxy Wire ring for Dream Catcher
Set of frames diam. 90cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
