White Metal Circle of 20 cm for Shades, White Epoxy Wire ring for Dream Catcher

Set of black frames diam. 80 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27

Wire thickness : 3.2 mm to 4,3 mm

To create lampshades, dream catchers or for any other use.

Wire diameter: 2.6mm

Set of 2 big red metal circles, diam. 60 cm for lampshade, Epoxy rings Dreamcatcher

Set of 2 old gold circles, Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher

Large antique gold Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher

Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher

Set of frames diam. 13 cm for lampshade, Round rings epoxy white, for lamp holder 38mm E27

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!

Square Frame Set with feet, 20 cm for lampshade, Square epoxy white, for lamp holder 40mm E27

Set of 5 old gold metal circles, Ø 10 cm to 50 cm, epoxy rings for dream catcher, lampshade

wire thickness: 2.6 mm to 3.6 mm

Set of 2 large antique gold metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher

Set of black frames diam. 30cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27

Set of 2 old gold circles, Diameter 30 cm for lampshade, epoxy rings for Dreamcatcher

Polyphane is a solid, plasticized and rigid material. Shade base material.

The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!