Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Wire diameter: 2.6 mm
The ring is suspended from a rod when passing through the paint booth.
There is a small place that will not be covered with paint since it is placed on this support.
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
Decorative feathers, length 8 to 10cm, about 110 feathers, 10 g
Alcantara cord, 1 meter faux suede, peach skin effect, width 3 mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Pendant Jewelry Kit, Dream Catcher, DIY Luna Necklace, 83cm Chain
Set of 3 gold metal beads, diameter 8 mm, large hole 3 mm, for jewelry or dream catcher
Set of 3 silver metal beads, diameter 8 mm, large hole 3 mm, for jewelry or dream catcher
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of 5 large white metal circles Diameter 60 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 4 large Golden metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Set of 5 White metal oval 15x10 cm for lampshade, Epoxy for Dreamcatcher
Set of black frames diam. 90 cm for lampshade, large round rings epoxy black, for lamp holder 40mm E27
Set of frames diam. 20cm for lampshade, round rings epoxy white, for lamp holder 28mm E14
Set of 4 metal circles red, diameter 30 cm to 60 cm, rings for dream catcher, lampshade
Big Set of 8 large Black metal circles Diameter 30 cm to 100 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large white metal circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
White metallic square 35 x 35 cm for lampshade, White epoxy Dream catcher
Large XXL black Metal Circle of 80 cm for Shades, Epoxy Wire ring for Dream Catcher
Frame set from Ø 20 to 40cm for conical lampshade, Round head Ø 20cm, Bare ring Ø 40cm, white epoxy, for E27 socket
Set of 7 large old gold metal circles Diameter 30 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
To create lampshades, dream catchers or for any other use
Wire diameter: 2.6mm
Large XXL antique gold Metal Circle of 100 cm for Shades, Epoxy Wire ring for Dream Catcher
To create lampshades, dream catchers or for any other use.
Wire diameter: 2.6mm