Copper plate, 120 x 120 x 0.8 mm, for enamelling, decoration, creation
Copper plate, 120 x 120 x 0.8 mm, for enamelling, decoration, creation
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven !
Transparent finish: veil of color that reveals the background or the pattern of the support.
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC
Set of 6 blanks, wooden, 15 cm, for modeling clay, terracotta
Set of 2 Copper foil cutouts 100 x 150 mm x 0,1 mm, for enamelling and decorating
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Set of 2 Copper foil cutouts 100 x 150 mm x 0,1 mm, for enamelling and decorating
Sanding block, fine grain, 5 x 4 x 2 cm, polishing
Powder against opaque enamel, 45 gr, for baking at 780 ° C-850 ° C
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
Hexagonal mosaic enamel, colored, diameter 3 mm, 20 g bottle
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
Copper foil, 300 x 200 x 0.1 mm, for enamelling, decoration, creation
Copper foil, 300 x 200 x 0.2 mm, for enamelling, decoration, creation
Square mosaic enamel, assorted colors, 2.2 mm, 20 g bottle
Copper plate, 120 x 120 x 0.8 mm, for enamelling, decoration, creation
