6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
10 Bird copper plates 30x25 mm, blank thickness 0.8 mm, for enamelling
10 Bird copper plates 30x25 mm, blank thickness 0.8 mm, for enamelling
6 meters of Cordelette, waxed cotton, ø 2 mm, in blister
Anodized structured aluminum wire, ø 2 mm, 2 meters, for jewelry creation
Anodized aluminum wire, wave structure, ø 2 mm, length 2 meters
Efcolor Enamel is a low temperature resin based enamel powder which can be used on metals such as silver or copper, along with glass, wood, porcelain and stone. As with all Efcolor enamels, this enamel does not require the use of a kiln, as it can be fired in a conventional oven at 150°C. This fabulous product enables anyone to create enamelled jewellery designs with ease. Simply sieve onto your chosen backing, transfer to a firing plate, and fire in a pre-heated oven at 150°C for 3 - 5 minutes. Care must be taken when removing your piece from the oven as it will be hot. A Sieve Top may be useful for easy application of the powder. This resin based enamel is supplied in a 10ml pot.
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven !
Transparent finish: veil of color that reveals the background or the pattern of the support.
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC
Efcolor overglaze powders are ideal for giving an enameled appearance to your creations, while avoiding the constraints of traditional enamel firing with a specialized oven!
3x6 m Weavecord Satin Ø 1mm, 100% Polyester, in bag
Cord alcantara, 4x1 meter faux suede, peach skin effect, width 3 mm
Set of 10 Pendants, copper, Bird, 1 hole, 30 x 32 mm, blank for enameling
Spool of leather lace, silver, 9m x diam. 1mm, cord roll
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
30 meters of waxed cotton cord, ø 1 mm, 5x6 m cord in blister pack
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Set of 10 Copper Pendants, Snail 4,8 x 2 cm, 0.8 mm thick, for enamelling
10 copper pendants Locomotive 40 x 27 mm, blank thickness 0.8 mm for enameling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
10 copper pendants Foot and Hand 29x31 mm, blank 0.8 mm for enamelling
Set of 10 Pendants, copper, Bird, 1 hole, 30 x 32 mm, blank for enameling
Set of 10 Pendants, copper, Dove, 1 hole, 26x22 mm blank, swallow for enameling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Lot of 10 Pendants, copper, Star, 1 hole, 17 x 20 mm, blank for enameling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Firing temperature 780-850 ° C on copper, silver, gold and iron.
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.