Firing temperature 780-850 ° C on copper, silver, gold and iron.
The 13 enamel colors are sold in powder form.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
If you use, transparent enamel, it will remain clearly visible.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
This new special adhesive for enamelling is supplied in liquid form.
lt both decreases the metal base and forms an adhesive film which holds the enamel in moving and firing.
The adhesive must always be applied with a brush to upright shapes before decoration.
This fixative is designed for use with enamel powders fired between 780°C and 850°C. It is not compatible with Efcolor powders.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
This packet of Millefiore coloured glass beads can be applied to a layer of enamel and fused. Counter enamelling is recommended. Sold in 40gr pack.
Square mosaic enamel, assorted colors, 2.2 mm, 20 g bottle
Set of 10 Leaf copper plate, diam. 3,4 x 2,4 cm for enamelling
Hexagonal mosaic enamel, colored, diameter 3 mm, 20 g bottle
Lot of 10 pendants, copper, diamond, 2 holes, 47 x 16 mm, blank for enamelling
Set of 10 Copper Pendants, Windmill 3 x 2,2 cm, 0.8 mm thick, for enamelling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
The 24 opaque enamel colors are sold in powder form.
If you use opaque enamel, the metal surface will no longer appear after firing.
You will appreciate the great brilliance and radiance of the colors of the enamel manufactured by EFCO, despite the absence of lead in its manufacture.
We recommend that you set the temperature of your oven between 750 ° C and 850 ° C, (enamel melting temperature). This will take between 2 and 3 minutes to melt.
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Lot of 10 Pendants, copper, elephant, 1 hole, 35 mm blank, for enameling
Set of 10 copper pendants Frog 35 x 28 mm, blank thickness 0.8 mm, for enameling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
These copper blanks are top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
Bag of 10 pieces.
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Lot of 10 Pendants, copper, Star, 1 hole, 17 x 20 mm, blank for enameling
10 copper blank oldtimer 31x25 mm, blank thickness 0.8 mm, for enamelling
These copper blanks are of top quality for enameling.
Use these shapes to make pendants, charms, and other jewelry components.
All copper pieces have a thickness of 0.8 mm.
Can be used with both true enameling techniques and low-temperature enameling, around 150°C for Efcolor.
Pack of 10 pieces.
Lot of 10 copper pendants in the shape of a dolphin, 1 hole, 45 x 17 mm, for cold enameling
10 Copper pendants, Key, 31x14 mm, blank thickness 0.8 mm for enamelling
Copper plate, 120 x 120 x 0.8 mm, for enamelling, decoration, creation
10 copper pendants Locomotive 40 x 27 mm, blank thickness 0.8 mm for enameling
Firing temperature 780-850 ° C on copper, silver, gold and iron.
