Set of 5 White metal squares, size 10 cm to 30 cm, Epoxy rings for Dreamcatcher, lampshade
Lot 5 White metal squares, size 10 cm to 30 cm, Epoxy rings for Dreamcatcher, lampshade
It is epoxy resin quality: a white anti-corrosion layer protects your carcass over time.
When passing through the paint booth, the frame is suspended on a pole.
There is a small area that will not be covered with paint since it is placed on this base.
If you want to paint it, we recommend using spray paint after sanding the white paint a little with sandpaper for better adhesion.
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
Set of 3 gold metal beads, diameter 8 mm, large hole 3 mm, for jewelry or dream catcher
Set of 3 silver metal beads, diameter 8 mm, large hole 3 mm, for jewelry or dream catcher
Set of approx. 36 Genuine cut feathers, Antique rose, Length 5-6 cm, for Jewelry or dream catcher
Set of 9 white metal circles Diameter 5 cm to 30 cm for lampshade, epoxy rings for Dreamcatcher
Set of 5 large white metal circles Diameter 60 cm to 90 cm for lampshade, epoxy rings for Dreamcatcher
White metallic square 35 x 35 cm for lampshade, White epoxy Dream catcher
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Set of 4 large Black metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Set of 4 large Golden metal circles Diameter 30 cm to 60 cm for lampshade, epoxy rings for Dreamcatcher
Linen color Lace Ribbon, 1 cm x 5 m, string for vintage table decoration
Set of approx. 36 real cut feathers, yellow, length 5-6 cm, for jewelry or dream catcher
Set of approx. 36 real cut feathers, red, length 5-6 cm, for jewelry or dream catcher
Set of 10 rings, in beech wood, diameter 6,8 cm, for macrame, jewellery, pacifier
Set of 10 square wooden sticks, length 30 cm, diameter 0.8 cm, rods, sticks, macramé
Set of 10 rings in wood, diameter 4,8 cm, for macrame, jewellery, pacifier
Polyphane is a solid, plasticized and rigid material. Shade base material.
The polyphane sheet is very practical for the creation of lampshades. Indeed, it is squared which will allow you to take your bearings easily! The polyphane sheet serves as a template and structure for the creation of lamps. It can be cut with good scissors or a cutter, and glued with a glue gun. In addition, the grid film is adhesive: it can therefore be removed as soon as the cut is finished (the polyphane is white under the grid). Then cover your polyphane sheet with fabric, fix everything on the frame of your lamp and you're done!
Big Set of 3 large black metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Black Metal Circle of 40 cm for Shades, Epoxy Wire ring for Dream Catcher
Large XXL White Metal Circle of 100 cm for Shades, White Epoxy Wire ring for Dream Catcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of frames diam. 90cm for lampshade, large round rings epoxy white, for lamp holder 40mm E27
Set of 2 large black metal circles Diameter 60 cm for lampshade, epoxy rings for Dreamcatcher
White metallic square 15 x 15 cm for lampshade, White epoxy Dream catcher
Set of 2 large antique gold metal circles Diameter 70 cm for lampshade, epoxy rings for Dreamcatcher
Set of 2 large old gold circles Diameter 90 cm for lampshade, epoxy rings for Dreamcatcher
Set of frames with legs, diam. 30 cm for lampshade, Round rings epoxy white, for lamp holder 40mm E27
Set of 9 white metal circles Diameter 5 cm to 30 cm for lampshade, epoxy rings for Dreamcatcher
Small set of frames diam. 15cm for lampshade, Round rings epoxy white, for lamp holder 28mm E14
Large antique gold Metal Circle of 60 cm for Shades, Epoxy Wire ring for Dream Catcher
This round clamp clip is ideal for creating custom-made lampshades. It sits directly on the bulb. It can be attached to another circle of another size and at the desired height.
It has a white epoxy finish which gives it resistance over time.
Set of 5 old gold circles, Diameter 40 cm for lampshade, epoxy rings for Dreamcatcher